SAM-BA® ISP - Applets: Enable Internal RC

Enable Internal RC (internalrc)

The internalrc applet forces the selection of the internal 12 MHz RC oscillator as the source of the MAIN Clock (MAINCK).

internalrc Command Structure

​

Before executing the bootconfig writecfg:fuse command, you must execute the internalrc command once per RESET.

The internalrc applet must be called once after each RESET before executing the bootconfig writecfg:fuse command

The internalrc applet has the following command structure:

​

$ sam-ba -p serial -d <device> -a internalrc

There are no parameters.

  Return to Top

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.