Comparator Register Options

Each comparator has two control registers: CMxCON0 and CMxCON1.
The CMxCON0 register contains control and status bits for the following:

  • Enable
  • Output selection
  • Output polarity
  • Speed/Power selection
  • Hysteresis enable
  • Output synchronization

The CMxCON1 register contains control bits for the following:

  • Interrupt enable
  • Interrupt edge polarity
  • Positive input channel selection
  • Negative input channel selection

The MPLAB® Code Configurator (MCC) makes it easy to setup the comparator features for your specific device. Refer to the data sheet for your device for detail on the various options as it can vary slightly from device to device.

© 2016 Microchip Technology, Inc.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.