Fixed Voltage Reference (FVR) Setup

The FVR can have two separate output voltages, both based on the same 1.024 V base. Both are enabled or disabled by setting or clearing the Fixed Voltage Reference bit (FVREN) in the Fixed Voltage Reference Control Register (FVRCON).

ADC Fixed Reference Voltage

The output of the FVR, when supplied to the Analog to Digital Converter (ADC), is routed through an independent programmable gain amplifier. The amplifier can be configured to amplify the reference voltage by a multiplier of 1x, 2x or 4x to produce the three possible voltage levels.

To select the voltage level, the ADC Fixed Reference Selection bits (ADFVR<1:0>) of the Fixed Voltage Reference Control Register (FVRCON) are used to enable and configure the gain amplifier settings for the reference supplied to the ADC module. To minimize current consumption when the FVR is disabled, the FVR buffers should be turned off by clearing the ADFVR<1:0> bits.

Comparator, DAC, Capsense Fixed Reference Voltage

The output of the FVR, when supplied to the comparator or the Digital to Analog Converter (DAC), is routed through an independent programmable gain amplifier. The amplifier can be configured to amplify the reference voltage by a multiplier of 1x, 2x or 4x to produce the three possible voltage levels.

To select the voltage level, the Comparater and DAC Fixed Reference Selection bits (CDAFVR<1:0>) of the Fixed Voltage Reference Control Register (FVRCON) are used to enable and configure the gain amplifier settings for the reference supplied to the Comparator, DAC and Capsense module. To minimize current consumption when the FVR is disabled, the FVR buffers should be turned off by clearing the CDAFVR<1:0> bits.

FVRCON: FIXED VOLTAGE REFERENCE CONTROL REGISTER

fvr3.png
fvr4.png

FVR Stabilization Period

When the Fixed Voltage Reference module is enabled, it requires time for the reference and amplifier circuits to stabilize. Once the circuits stabilize and are ready for use, the FVRRDY bit of the FVRCON register will be set.

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.