Automotive Networking Development Board
admboard.png

The Automotive Networking Development Board is a low-cost modular development system for Microchip’s 8-bit, 16-bit, and 32-bit microcontrollers targeting CAN and LIN network-related applications. The board supports devices using the 100-pin Plug-In Module (PIM) connector for easy device swapping. The board has four mikroBUS™ sockets which allow the user the ability to develop with a variety of add-on MikroElectronika Click boards™. The board also includes a PICtail™ Plus edge connector for backward compatibility to PICtail Plus boards used with the Explorer 16 Development board.

Product Features

  • 100-pin PIM header, supports 8-bit, 16-bit, and 32-bit compatible 100-pin PIMs.
  • Breakout area on the board that brings out the PIM pins to allow a variety of configurations for development or debugging.
  • A power switch that allows either 3.3 V or 5 V supply for the MCU on the PIM.
  • Four mikroBUS sockets to support hundreds of add-on MikroElectronika Click boards to allow a variety of CAN, CAN-FD, or LIN network configurations.
  • Multiple input clock options.
  • Edge connector for PICtail Plus card compatibility.
  • Standard six-wire In-Circuit Debugger (ICD) connector for MPLAB® ICD programmer/debugger module.
  • Allows direct 7-30 V input Direct Current (DC) power to provide regulated +3.3 V and +5 V output to the entire board.
  • User interface options include analog potentiometer and physical switches.

Automotive Networking Development Board

 
Microchip Direct
Buy here >

Note: This board does not come with any PIMs or Power Supply. The user will need to purchase these separately as needed.

Power supply and PIMs recommended add-ons below:
- 12 V power Supply PS0019 or 9 V power supply (AC002014)
- MCP2003B click LIN Transceiver
- MCP25625 click CAN Controller with Integrated Transceiver
- Microchip 100-pin PIM boards.

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.