dsPICDEM™ MCLV-2 Development Board (Low Voltage)

dsPICDEM™ MCLV-2 Development Board


This board provides a cost-effective method for evaluating and developing sensored or sensorless brushless DC (BLDC) and permanent magnet synchronous motor control applications. This board is controlled by a 16-bit digital signal controller (dsPIC®) or 32-bit microcontroller (PIC32). These controllers are mounted on a plug-in module daughterboard (plug-in modules sold separately).

This board requires an external programmer/debugger (e.g., MPLAB® ICD 4).

Application notes, user's guide (board description & schematics) and software examples:


Microchip Direct
Buy here >

Motor control plug-in modules (PIMs)

The following Plugin Modules (PIMs) mount onto the dsPICDEM MCLV-2 Development Board, enabling you to choose the 16- or 32-bit controller that satisfies your needs. A full list of available PIMs can be found on the development board support page.

Tool About Purchase
PIC32MK1024 Motor Control PIM

MPLAB® Harmony example projects for this PIM

All example projects included in the MPLAB Harmony software framework are documented in the Harmony Help file under "Volume I: Applications Help". To find all projects that use this specific board, search the Harmony Help file for "MCLV".

The following projects are included in Harmony version 2.05.01:

Project Name Location Description
dualshunt_pll_foc_mclv2_ext_opamp.X <install-dir>/apps/motor_control/dualshunt_pll_foc_mclv2_ext_opamp/firmware Dual Shunt PLL Estimator-based FOC demonstration on PIC32MK using an external op amp configuration
dualshunt_pll_foc_mclv2_int_opamp.X <install-dir>/apps/motor_control/dualshunt_pll_foc_mclv2_int_opamp/firmware Dual Shunt PLL Estimator-based FOC demonstration on PIC32MK using an internal op amp configuration
© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.