PIC32MM USB Curiosity Development Board

The PIC32MM USB Curiosity Development Board uses a PIC32MM0256GPM064 microcontroller. It has two MikroBus® expansion sockets to add click boards™ from MicroElektronika. It also has a reset button, three general purpose push buttons, a Red/Green/Blue (RGB) LED, two general purpose indicator LEDs, an analog potentiometer, and two USB micro-B connectors (one for program/debug). Two female header strips provide access to the microcontroller I/O pins. It also has two Microchip X32 headers for the PIC32 Audio Codec Daughter Card - AK4642EN (AC320100).

This board has an on-board programmer/debugger. No external programmer/debugger (e.g., ICD4) is required.

Quick start guide (description and schematics) and software examples:

Microchip Direct
Buy here >

MikroElectronica Secure click board


The Secure click board from MikroElectronika carries the ATECC508A cryptographic coprocessor with secure hardware-based key storage. The click is designed to run on either a 3.3 V or a 5 V power supply. It communicates with the target microcontroller over the I2C interface.

MikroElectronica Weather click board


The Weather click board from MikroElectronika detects humidity, pressure, and temperature, specifically designed for low current consumption and long-term stability. The click is designed to work on a 3.3 V power supply. It communicates with the target microcontroller over the SPI or I2C interface.

MikroElectronica microSD click board


The microSD click board from MikroElectronika has a microSD card slot for microSD cards used as a mass storage media for portable devices. The microSD click is designed to run on a 3.3 V power supply. It communicates with the target microcontroller over SPI.

MikroElectronica USB UART click board


The USB UART click board from MikroElectronika uses an FT232RL USB-to-UART interface module and a USB mini-B connector. It communicates with a target board via a UART interface. The board is powered with a 5 V power supply, but is designed to use 3.3 V or 5 V I/O levels (selectable via SMD jumper).

MikroElectronica WiFi 7 (WINC1510) click board


The WiFi® 7 Click Board from MikroElectronika uses the ATWINC1510-MR210PB IEEE 802.11 b/g/n module, specifically optimized for low-power IoT applications. It is designed to run on a 3.3 V power supply. It communicates with the target microcontroller over SPI interface, with additional functionality provided by the following pins on the mikroBUS line: PWM, INT, RST.

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.