BLDC 24V Motor Control Kit
ATSAMD21BLDC24V-STK.png

The BLDC 24V Motor Control Kit is a low voltage Brushless DC (BLDC), Permanent Magnet Synchronous Motor (PMSM) motor control starter kit. The kit contains a driver board hardware with half-bridge power MOSFET drivers, current and voltage sensing circuit, Hall and Encoder interface, fault protection circuits, etc. The ATSAMD21MOTOR MCU card (included with this motor control kit) is plugged into the driver board and has an on-board debugger.

Documentation and software:

 
Microchip Direct
Buy here >
sam_d21_motor.png

The SAM D21 Motor Control Card uses an ATSAMD21E16L MCU. This board comes with this BLDC 24V Motor Control Kit.

sam_c21_motor.png

The SAM C21 Motor Control Card uses an ATSAMC21J18 MCU. This board is sold separately:

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.