Example: DHCP Client Server

Example: DHCP Client Server

Here is a very common example of the client-server programming model. The dynamic host configuration protocol (DHCP) is the application responsible for requesting and offering IP addresses.

A DHCP client automatically requests an IP address from a DHCP server when a network is detected. A DHCP client could request a new IP address at any time, so the DHCP server must always be active and ready to respond to client requests. The DHCP server application typically exists in a router, but may also be found running on a network server for larger networks.

dhcp_example.png
© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.