Connecting a Ethernet Switch to a PIC32MZ

Does Microchip have any demo boards, reference designs, or schematics that could be used for product development that incorporates a PIC32MZ1024EFE064 with a KSZ8795 ethernet switch?

Please have a look at the documentation for our Ethernet Starter Kit II. A switch can easily be connected instead of using the Starter Kit's LAN8740.

The PHY Daughter board LAN9303 documentation shows a KSZ8863 connected. This pinout should be identical to the KSZ8795 for MII and RMII interfaces.

Please refer to the following design examples:

  Return to Top

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.