Differences between LoRa® PICtail™ and LoRa Mote

The RN2903 LoRa® Technology PICtail™/PICtail Plus Daughter Board is not a full end-device. It only has an RN2903 module soldered on a PICtail board format. The RN2903 LoRa PICtail board provides access to the RN2903's UART and General Purpose Input and Output (GPIO) ports.

​

More information can be found on the "RN2903 LoRa Technology PICtail/PICtail Plus Daughter Board" page.

The RN2903 LoRa® Technology Mote can be used as a complete end-device solution. An end-device has the RN2903 module controlled by a host controller and it also has attached sensors. This board has a host PIC® microcontroller which controls the RN2903 module and it also has an LCD, temperature and light sensors.

​

More information can be found on the "915 MHz RN2903 LoRa Technology Mote" page.

  Return to Top

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.