How can I change the MAC address using the Harmony TCP/IP stack?

There are two ways to change the MAC address used in the MPLAB® Harmony framework. You can change it using the MPLAB® Harmony Configurator (MHC), or modify a source file directly.


To configure the MAC address using MHC, expand the following selection tree:
Harmony Framework Configuration > TCPIP Stack > Use TCP\IP Stack? > Network Configuration 0
Enter the MAC address you want to use in the Mac Address text box.


To configure the MAC address by modifying the source file, open the system_config.h file. This file can be found in the Projects window under the following folder:
Header Files > app > system_config > default

Search (Ctrl + F) for "MAC_ADDR" to find this line of code:

Change the 0 to the MAC address you want to use, using the following format:

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.