Capacitive Sense Module Initialization

The Capacitive Sensing Module (CSM) simplifies the amount of hardware and software setup needed for capacitive sensing applications. CSM is an on-chip capacitive sense module which needs to be configured via user firmware. "Application Note AN1171" explains the configuration of the Capacitive Sense Module.

Alternatively, you can use MPLAB® X IDE and the MPLAB Code Configurator (MCC). These tools allow you to easily configure the touch peripheral with the help of our graphical editor.

  Return to Top

© 2023 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.