Building the MCP250xx Project in MPLAB® X IDE

How do you fix Error - section '.cinit' can not fit the section. Section '.cinit' length=0x00000004 when the MCP250xx project included in the MPASM™ Suite directory is built in MPLAB® X IDE using MPASM 5.70 assembler?

In order to fix this error, build the project in absolute mode:

  1. Got to 'Project Properties'.
  2. Select 'mpasm (Global Options)'.
  3. Then select 'Build in absolute mode'.
© 2021 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.