Host Controller Interface (HCI) Access for RN42

Is there a firmware update in order to have the chip configured in Host Controller Interface (HCI) over USB mode?

HCI mode is only available by ordering part RN42HCI and RN42HCI for UART interface, or RN42U and RN42U for USB interface. For more details on how to use these, see the "Class 2 Bluetooth® Module with EDR Support" datasheet in the "Documents" section of the RN42 product page.

Microchip offers HCI mode in two hardware interfaces:

  • HCI over UART (RN42HCI-I/RM)
  • HCI over USB (RN42U-I/RM)
© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.