Documentation - How can I set the VID/PID through the HID interface for MCP2200?

How can I set the VID/PID through the HID interface for MCP2200?

For custom VID/PID, we have a few options:

  • The MCP2200 can be pre-programmed from the factory. This can be requested through the local Microchip Sales office. This procedure might require a business case.
  • If you wish to use Windows®, we recommend downloading MCP2200 Production Utility v1.1 from the "MCP2200 Isolated USB to UART Demo Board page" under 'Documentation & Software'. Use MCP2200 Configuration Utility v1.3.1 to create the config file, and then use MCP2200 Production Utility v1.1 to write it. This is documented in the product datasheet.
© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.