Can I add custom tones, notification sounds, or tunes to BM2X modules?

Yes, it is possible to add your own tones. However, there are requirements for the WAV file and a memory limitation associated.

Limitations are:

  1. The tone length limitation is three seconds; for Power On Tone, the limitation is 4.5s.
  2. Sampling rate should be 8 k.
  3. Bit rate should be 16-bit.
  4. The type is monotype.
  5. The size of translated raw data can't be over 9 KB.

The UI Tool for the BM2x products can be used to store the custom tone in the BM2x device. There is an associated user guide for this tool, which covers the information described in this FAQ.

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.