MPLAB® Harmony Configuration - Error: "... not a valid Harmony directory"

When you create a new MPLAB® Harmony project, you must specify it as a "32-bit MPLAB Harmony Project". When creating a new Harmony project, in the New Project wizard, the first line requires you to specify the path in which Harmony is installed (e.g., C:/microchip/harmony/vx.xx).

Failure to do this generates the following error message when you try to start the MPLAB® Harmony Configurator (MHC): "This project is not in a valid MPLAB Harmony directory hierarchy."

  Return to Top

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.