How do you simulate the RCxREG for UART?

Do the following steps to simulate the RCxREG for UART:

  1. Go to Window > Simulator > Stimulus.
  2. Add a test variable to the RC1REG.
  3. Add the test data into a file and add it to the 'Data Filename' tab.
  4. Press 'Apply synchronous stimulus' (the play button).

Under the 'Help' menu, click on 'Tool Help Contents' and select 'Simulator Help'. There is a section on 'Using Stimulus' that describes the process and gives an example that will help you get a better understanding of the topic.

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.