Harmony v3 Peripheral Libraries on PIC32MX 470: Step 1

Step 1.1: Install the MPLAB® Code Configurator (MCC) Plug-in in the MPLAB X IDE

1

Verify that MCC is installed.

• Launch MPLAB X IDE from the Windows® Start Menu. Close any projects and files that are currently open.
• Go to Tools > Embedded.
• You will see MPLAB Code Configurator v5 in the menu. If you don't see it in the menu, please install MCC.

mcc_setup.png
  • When you launch MCC for the first time, it displays a prompt asking for the mode in which you would like to use MCC.
    • Standalone mode (as a separate window)
    • Native mode (as an embedded window in MPLAB X IDE)
  • Standalone mode is the default mode.
  • MCC will launch in the operating mode selected the first time, every time you launch MCC.

For this lab, MCC is configured to operate in Standalone mode.

Step 1.2: Create MPLAB Harmony v3 Project Using MPLAB X IDE

1

Select File > New Project from the main IDE menu.

Close all existing opened projects before you start creating a new project.

2

In the Categories pane of the New Project dialog window, select Microchip Embedded. In the Projects pane, select 32-bit MCC Harmony Project, then click Next.

project_creation_setup.png

If 32-Bit MPLAB Harmony 3 Project is not displayed, you will need to install MCC.

3

In the Framework Path edit box, browse to the folder you downloaded the framework to. If you haven't done this, or want to download it to a different folder, click the Launch Content Manager button, then click Next.

For more information on the content manager, see the "Download MPLAB Harmony Framework" section of the "MPLAB Code Configurator Overview" page.

project_path_setup.png

4

In the Project Settings window, apply the following settings:

  • Location: indicates the path to the root folder of the new project. All project files will be placed inside this folder. The project location can be any valid path, for example: C:\microchip\harmony\v3\training\dev.
  • Folder: indicates the name of the MPLABX .X folder. Enter "pic32mx470_curiosity" to create a pic32mx470_curiosity.X folder.

This must be a valid directory name for your operating system.

  • Name: enter the project’s logical name as "getting_started_pic32mx470_curiosity". This is the name that will be shown from within the MPLAB X IDE.

The Path box is read-only. It will update as you make changes to the other entries.

  • Click Next to proceed to configuration settings.
project_naming_setup.png

Clicking on the Show Visual Help button will open a help window, providing a detailed description of the various fields in the Project Settings window.

project_naming_setup_help.png

5

Follow the steps below to set the project’s configuration settings:

  • Name: enter the configuration name as "pic32mx470_curiosity".
  • Target Device: select PIC32MX470F512H as the target device.

You can select the Device Family or enter a partial device name to filter the list in Target Device in order to make it easier to locate the desired device.

  • After selecting the target device, click Finish to launch MCC.
project_setup_finish.png

The New Project wizard opens a MCC content manager window to allow you to review the packages that will be used by the current project.

6

While the MCC tool launches, Click on Select MPLAB Harmony content type.

mcc_launch_step1.png

Click on the Finish Button in the MCC Content Manager Wizard.

mcc_launch_step2.png

7

The MCC plug-in’s main window for the project will be displayed in Standalone mode, as shown in the following image.

launched_mcc_view.png

8

Before proceeding, set up the compiler toolchain. Click on the Projects tab on the top left pane in MPLAB X IDE. Right-click on the project name getting_started_pic32mx470_curiosity and go to Set Configuration > Customize.

project_view.png

Make sure that XC32 (v4.30) is selected as the Compiler Toolchain for XC32. Click on Apply and then click on OK.

xc32_setup.png

Tool Tip: If you closed MCC accidentally and would like to open it again, go to Tools > Embedded > MPLAB Code Configurator v5 in MPLAB X IDE.

Step 1.3: Verify Clock Settings

1

Launch Clock Easy View by going to Project Graph in MPLABX IDE and then select Plugins > Clock Configuration.

clock_configuration_open.png

A new window, Clock Diagram is opened inside MCC.

2

Click on the Clock Diagram tab, scroll to the right and verify that the SYSCLK is set to 96 MHz.

clock_configuration_setup.png

Tool Tip: Double click on Clock Easy View tab to maximize the window.



Next Step >

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.