Lab 1: Create the Application

Step 1: Install the MPLAB® Harmony Configurator (MHC) Plug-in in MPLAB X IDE

1

Verify that MPLAB® Harmony Configurator (MHC) is installed.

  • Launch MPLAB X IDE.
  • Go to Tools > Embedded.
  • You will see MPLAB Harmony 3 Configurator in the menu.
lab1_step1.png
Figure 1: Check if Harmony 3 Plug-in is installed

Note: If you don't see MPLAB Harmony 3 Configurator in the menu, install MHC.



Next Step >

© 2022 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.