Lab 2: Log Data to SD Card

< Back to Lab Index

Next Step >

Step 5: With MHC, configure Harmony Core and BSP

1

Add a new application that handles the logic to run the SDCARD task of the state machine. To do this, in Project Graph, select the Core component, and set the Number of Applications to 2. Next, enter "app_sdcard" for the Application Name below the Application 1 Configuration

lab2_step5.png
Figure 1: Add a New app_sdcard Application


Next Step >

  Return to Top

© 2025 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.