Lab 3: Move Application into an RTOS

Step 2: With MHC, Configure FreeRTOS

1

Open MHC by selecting Tools > Embedded > MPLAB Harmony 3 Configurator.

2

Add FreeRTOS under Available Components > Third Party Libraries > RTOS > FreeRTOS.

lab3_step2_02a.png
Figure 1: Add FreeRTOS

FreeRTOS Component is now part of the Project Graph. Keep the settings with default values.

lab3_step2_02b.png
Figure 2: FreeRTOS Configuration Options



Next Step >

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.