Getting Started with Harmony v3 Peripheral Libraries on SAM L10 MCUs

Objective

MPLAB^® Harmony v3 is a flexible, fully integrated embedded software development framework for 32-bit microcontrollers (MCUs) and microprocessors (MPUs). MPLAB Harmony v3 includes the MPLAB^® Code Configurator (MCC) tool, a set of modular Peripheral Libraries (PLIBs), drivers, system services, middleware, and numerous example applications, all of which are designed to help you quickly and easily develop powerful and efficient embedded software for Microchip’s 32-bit PIC^® and SAM devices.

This tutorial shows you how to use the MCC to create an application that gets you started in developing applications on SAM L10 MCUs using the MPLAB Harmony v3 software framework.

The application makes use of the SAM L10 Xplained Pro Evaluation Kit and the I/O1 Xplained Pro Extension Kit (sold separately).

The application reads the current room temperature from the temperature sensor on the I/O1 Xplained Pro Extension. The temperature read is displayed on a serial console periodically every 500 milliseconds. The periodicity of the temperature values displayed on the serial console is changed to one second, two seconds, four seconds, and back to 500 milliseconds every time you press the switch SW0 on the SAM L10 Xplained Pro Evaluation Kit. Also, an LED0 is toggled every time the temperature is displayed on the serial console.

The application you create will utilize:

SERCOM (as I²C) PLIB to read the temperature from a temperature sensor
Real-Time Clock (RTC) PLIB to periodically sample temperature sensor data
SERCOM (as Universal Synchronous Asynchronous Receiver Transmitter (USART)) and Direct Memory Access (DMA) PLIBs to print the temperature values on a COM (serial) port terminal application running on a PC
PORT PLIB to toggle the LED
External Interrupt Controller (EIC) PLIB to change the periodicity of temperature sensor data read using SWITCH press event

In the process, the lab will also demonstrate the use of callback functions.

Two ways to use this tutorial:

Create the project from scratch:
- Use the provided source files and step-by-step instructions below.
Use the solution project as an example:
- Build the solution project and program it to the SAM L10 Xplained Pro Evaluation Kit Board to observe the expected behavior.

Lab Objectives

Create an MPLAB X IDE Harmony v3 project for a SAM L10 microcontroller from scratch.
Use MCC to configure and generate Harmony v3 PLIBs code for RTC, I²C, USART, DMA, and PORT peripherals.
Use the Harmony v3 PLIB Application Programming Interfaces (APIs) to implement the application.

Materials

Hardware Tools

Tool	‍ About	‍ Purchase
SAM L10 Xplained Pro Evaluation Kit	‍	‍
I/O1 Xplained Pro Extension Kit	‍	‍

The Xplained Pro series evaluation kits include an onboard Embedded Debugger (EDBG). No external tools are necessary to program or debug the ATSAML10E16A. For programming/debugging, the EDBG connects to the host PC through the USB micro-B connector on the SAM L10 Xplained Pro Evaluation Kit.

▶ Show Hardware Setup

Software Tools

This project has been verified to work with the following versions of software tools:
MPLAB X IDE v6.10, MPLAB XC32 Compiler v4.30, and MPLAB MCC v5.3.7

Because we regularly update our tools, occasionally you may discover an issue while using the newer versions. If you suspect that to be the case, we recommend that you double-check and use the same versions that the project was tested with.

Tool	‍ About	Installers			‍ Installation Instructions
Tool	‍ About	‍ Windows	‍ Linux	‍ Mac OSX	‍ Installation Instructions
‍ MPLAB^® X Integrated Development Environment	‍	‍	‍	‍	‍
‍ MPLAB^® XC32 C/C++ Compiler	‍	‍	‍	‍	‍

For this lab, download the following repositories from GitHub:

CSP: The following table shows the summary of contents.

Folder	Description
apps	Example applications for CSP library components
arch	Initialization and starter code templates and data
docs	CSP library help documentation
peripheral	PLIB templates and configuration data

DEV_PACKS: The following table shows the summary of contents.

Folder	Description
Microchip	Peripheral register specific definitions
arm	Core Specific Register Definitions (CMSIS)

Use the MPLAB Code Configurator Downloader to download the repositories.

Overview

This lab shows you how to create an MPLAB Harmony v3 project from scratch, configure, and generate Harmony v3 PLIBs code for RTC, I²C, USART, DMA, and PORT peripherals. It demonstrates reading of temperature sensor values from the temperature sensor available on the I/O1 Xplained Pro Extension kit periodically and displays it on a serial console. The periodicity of temperature sampling is changed for every switch press event. Every time the temperature is displayed on the serial console, an LED is toggled.

Figure 1.1 Application Flow Sequence

The application initializes the clock, PORT, and other peripherals (configured through the MCC) by calling the function SYS_Initialize. The application registers callback event handlers for SERCOM (as I²C), DMA, RTC, and EIC PLIBs. The callback event handlers are called back by the PLIBs when the transaction completion events occur.

Note:

A callback event handler for SERCOM (as USART) is not registered as the actual USART data transfer, and it is accomplished by the DMA. The DMA calls back the callback event handler when the DMA transfer request is completed.
RTC peripheral is used for implementing the time period instead of the timer peripheral. This is done to demonstrate how to configure and use RTC peripheral in an application (particularly low power application).

The application checks whether the configured RTC timer period has expired. On every timer period expiration, the application calls the function SERCOM1_I2C_WriteRead to submit a temperature sensor read request to the I²C PLIB. The I²C PLIB calls back the registered callback event handler when the latest temperature value is read from the sensor. The application sets a flag in the I²C callback event handler.

Figure 1.1 shows the flow sequence of the application task.
Click the image to enlarge.

The application checks the temperature read complete flag to submit a written request to DMA to print the latest temperature value (in a formatted message) onto the serial console over the USART interface. The application also monitors the pressing of the switch SW0; if a switch press is detected, the application changes the temperature sampling rate from the default 500 milliseconds to one second. On subsequent switch press, the application changes the temperature sampling rate to two seconds, four seconds, and back to 500 milliseconds. The application cycles the temperature sampling rate on every switch press, as shown in Figure 2.

Figure 2

The application also toggles user LED0 every time the latest temperature value is displayed on the serial console.

Lab Source Files and Solutions

This ZIP file contains the completed solution project for this lab. It also contains the source files needed to perform the lab as per the following step-by-step instructions (see the "Procedure" section on this page).

The contents of this ZIP file need to be placed in the below folder:

<Any directory of your choice>/training/ (example Directory = C:/microchip/harmony/v5_3_7)

Note:

The project location of a Harmony v3 project is independent of the location of the Harmony Framework path (i.e. you don't need to create or place a Harmony v3 project in a relative path under the Harmony v3 framework folder). The project can be created or placed in any directory of your choice.
The point above is true because when created, a Harmony v3 project generates all the referred source and header files and libraries (if any) under the project folder.
Both points above contrast with the Harmony v2 project location. In Harmony v2, the project was supposed to be created in a location under the Harmony framework.

‍
.zip

Windows
Linux
Mac OSX

Extracting the ZIP file creates the following folders:

saml10_getting_started contains the lab solution (in the firmware folder) and source files (in the dev_files folder).
- dev_files contains the subfolder sam_l10_xpro which contains the application source files and other support files (if any) required to perform the lab (see "Procedure section" below).
- firmware contains the completed lab solution project. It can be directly built and programmed on the hardware to observe expected behavior.