SEGGER emWin Audio Player Tutorial: Step 7

Step 7: Configure Graphics Display, Graphics Driver and Touch

Step 7.1: Verify Graphics Display Configuration

Step 7.2: Verify Graphics Display Driver (LCC) Configuration

Step 7.3: Configure the Display Touch Driver To Use I2C Driver Instance 1

Step 7.4: Enable Touchscreen Control Using I2C

Step 7.5: Verify Touch System Service Is Enabled

Step 7.6: Set the I/O Pins Used By the I2C Module

Step 7.7: Set the Interrupt Pin Used By the Touch Driver

Next Step >

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.