JTAG Communication Method

Connection Types

Because you can use the J-Link Microchip Adapter to connect to the target board using either the 2-wire JTAG (ICSP) or 4-wire JTAG interface, you must choose which one your project will use.


Selecting the Communication Type

Follow the steps below to choose the communication type:

If the communication type does not match the actual connection, you WILL get errors when MPLAB X tries to communicate with the J-Link.



Select SEGGER J-Link node under Categories.


Select Communication Option Category.


Choose 2-wire JTAG or 4-wire JTAG for JTAG Method.

20th Annual
Microchip MASTERs Conference 2016
Register now - Deadline: July 29

JW Marriott Desert Ridge Resort-Phoenix, AZ

© 2016 Microchip Technology, Inc.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.