Add Halt Notifier Icon to Toolbar

By default, the Halt Notifier icon is not visible. The icon can be added to the toolbar in three ways:

1. Go to View > Toolbars and check "HaltNotifier". See (1) in Figure 1.
OR
2. Position the pointer over a movable object’s grabber or splitter (splitter.gif) in the toolbar to change the pointer to MoveCursor.png. Right-click and select "HaltNotifier" .
OR
3. Select "Customize" from the bottom of the list of available toolbars - see (2) in Figure 1 - to open the Customize Toolbar dialog - see Figure 2. Locate the icon in the Tools folder labeled “Enable/Disable/Configure Notifications” and drag it to the toolbar.

Using any of the above methods, the Halt Notifier icon icon.gif is added to the toolbar.

Figure 1: Add Icon to Toolbar

viewtoolbar.gif

Figure 2: Customize Toolbars

customizetoolbar.gif
© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.