Remove a Breakpoint from a Tuple

You can remove a breakpoint that you have previously added to a tuple while leaving the rest of the sequence intact.


Open Breakpoints Window

Main Menu:
Window ▶ Debugging ▶ Breakpoints



Click image to enlarge.


Remove the Breakpoint

Right click on the breakpoint you want to remove from the tuple and select Complex Breakpoint ▶ Remove from MyTuple from the pop-up menu, where MyTuple is the name of the sequence containing the breakpoint you are removing.

Click image to enlarge.
© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.