MPLAB® PM3 ICSP™ Hardware

The PM3 ICSP Cable (AC002021) allows you to perform In-Circuit Serial Programming™ (ICSP™) using the MPLAB® PM3 Universal Device Programmer. This cable plugs into the ICSP Connector on the top of the MPLAB PM3 Programmer (see Figure 1).

The PM3-to-ICSP Converter (AC164111) shown in Figure 2, provides an interface between the ICSP Connector on the MPLAB PM3 (see Figure 1) and an RJ-11 cable assembly, which is common to debug environments and most Microchip demonstration boards.

For more on the ICSP Connector (Header) and Cable pinout, see MPLAB PM3 Pod Hardware.

For details on the PM3-to-ICSP Converter, see Figures 3 and 4.

Figure 1: Top of MPLAB PM3 Programmer

Figure 2: AC164111 Board

Figure 3: AC164111 Board Layout

Figure 4: AC164111 Board Schematic
© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.