MCP19111 Digitally Enhanced Power Converter

MCP19111 - Hybrid Controllers - Microchip

MCP19111 is a mid-voltage (4.5 - 32 V) analog-based Pulse Width Modulation (PWM) controller family with an integrated 8-Bit PIC® Microcontroller. This unique product combines the performance of a high-speed analog solution, including high-efficiency and fast transient response, with the configurability and communication interface of a digital solution. Combining these solution types creates a new family of devices that maximizes the strengths of each technology to create a more cost-effective, configurable, high-performance power conversion solution. The MCP1911X family, when combined with Microchip's MCP87XXX MOSFETs, or any low Figure-of-Merit (FOM) MOSFET, produce high-efficiency (> 96%) DC/DC power-conversion solutions.

MCP19111-block-diagram.PNG

Figure-of-Merit devices focus on minimizing both on-state resistance (Rdson) and gate charge (Qg). They are focused on maximizing power conversion performance, making them ideal for switched-mode power supply applications.

MCP19111 Target Applications

MCP19111.png
 
Microchip Direct
Buy here >

MCP19111 Power Supply Evaluation board (ADM00397)

The MCP19111 Evaluation Board demonstrates how the MCP19111 device operates in a synchronous buck topology over a wide input voltage and load range. Nearly all operational and control system parameters are programmable by utilizing the integrated PIC microcontroller core. MPLAB X IDE can be used in conjunction with a Graphical User Interface (GUI) plug-in to easily configure the MCP19111. Alternatively, you can program the MCP19111 using your own firmware, tailoring it to your application. The evaluation board contains headers for ICSP™ (In-Circuit Serial Programming™) as well as I2C communication, pull-up and pull-down resistor pads and test point pads on each GPIO pin, and two push buttons for system development.

MCP1911 Power Supply Evaluation board (ADM00397) Features

  • Vin range: 5 V to 12 V
  • Adjustable Vout range: 0.5 V to 3.6 V
  • Maximum output current: 30 A with proper air flow
  • Programming and I2C communication headers
  • Factory programmed to produce 1.8 V from 12 V source
MCP19111-Evaluation-Board.png
 
Microchip Direct
Buy here >

‍ ‍

20th Annual
Microchip MASTERs Conference 2016
Register now - Deadline: July 29

JW Marriott Desert Ridge Resort-Phoenix, AZ

© 2016 Microchip Technology, Inc.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.