Step 4: Build and Program MCU1

< Back to Lab Start

Next Step >

Step 4.1 – Build Application for MCU1

1

Right-click on the project and select Build.

8-bit-PIC-DMA25a.png

2

The project will successfully build.

8-bit-PIC-DMA25b.png

Step 4.2 – Program MCU1

1

Click the Make and Program Device icon to program the MCU.

8-bit-PIC-DMA26.png

2

On the PIC18F57Q43 Curiosity Nano tab, you will be able to see a “Programming complete” message.

8-bit-PIC-DMA28b.png

  Return to Top

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.