Step 5: Create and Set Up MPLAB® X IDE Project for MCU2

Step 5.1 – Disconnect the MCU1 Demonstration Board and Connect MCU2 PIC18F57Q43

1

Connect the USB Micro-B cable from the PIC18F57Q43 Curiosity Nano Board to the computer. MPLAB® X Integrated Development Environment (IDE) will use this connection to program and debug the MCU.

Step 5.2 – Create Project

1

Create an MPLAB X IDE project for the PIC18F57Q43 using the MPLAB XC8 compiler.

Note: We’ll refer to your chosen project location as <your MPLAB X IDE project folder>.

You can refer to "Create a Standalone Project" if you would like detailed steps on how to create an MPLAB X IDE project.

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.