Microstick II Development Board
microstickii.png

Microstick II delivers a complete low-cost development hardware platform for Microchip's 16-bit and 32-bit microcontrollers and digital signal controllers. It's the perfect solution for a low-cost and easy-to-use development platform. The USB-powered kit includes an on-board debugger/programmer, a 28-pin socket for easy device swapping, an on-board LED, and a reset button. It has sockets in the bottom to accept pins, so it can be plugged into a 0.6" wide 28-pin socket or a breadboard for development.

Kit contents:

  • Microstick II Board
  • USB cable
  • 2 - 1x14 header pins for protoboard use
  • 1 - PIC24FJ64GB002
  • 1 - PIC24HJ128GP502
  • 1 - dsPIC33FJ128MC802
  • 1 - PIC32MX250F128B
  • Info Sheet (installation instructions and board schematic)
 
Microchip Direct
Buy here >
© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.