Which PIC32 starter kits support DBPRINT?

The following kits offer support for DBPRINT:

  • PIC32 Start Kit
  • PIC32 USB Starter Kit
  • PIC® Ethernet Starter Kit

A DBPRINT software macro must be added to the project properties compiler section, PIC32_STARTER_KIT. When running DBPRINTF, a tab called 'AppIO' opens inside the MPLAB® X IDE Output window.

The documentation can be found in the Debug section of the MPLAB® XC32 Libraries manual. While the documentation only mentions the PIC32 and PIC32 USB Starter Kits, the information is applicable to the PIC32 Ethernet Starter Kit.

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.