Low Voltage Programming
LowVoltageProgramming-ICD.png

2

Select ICD3 under Categories.

3

Select Program Options from the Options Categories combo box

4

Check box if you want to enable low voltage programming (LVP).

For the LVP configuration bit set to "Low-voltage programming enabled", you may program in either high-voltage (default) or low-voltage (enabled here.)

For the LVP configuration bit set to "High-voltage on MCLR/Vpp must be used for programming", you may only program in high-voltage.

Not available on all devices.
This option is for programming only. It is not valid for debug operations.

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.