ICD 4 Debugger Options Selection

Set up options on the debugger property pages of the Project Properties dialog.

1

Open the Project Properties dialog by doing one of the following:

a

Click on the project name in the Projects window and select File>Project Properties.

b

Right click on the project name in the Projects window and select 'Properties'.

2

Under 'Categories', click on 'ICD 4'.

3

Select property pages from 'Options' categories. Click on an option to see its description in the text box below. Click to the right of an option to change it.

The available option categories and the options within those categories are dependent on the device you select. The possible option categories are:

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.