ICD 4 Debugger Selection And Switching

Use the Project Properties dialog to select or switch debuggers for a project. To switch you must have more than one MPLAB® ICD 4 In-Circuit Debugger connected to your computer. MPLAB X IDE will differentiate between the two by displaying two different serial numbers.
To select or change the debugger used for a project:

1

Open the Project Properties dialog by doing one of the following:

a

Click on the project name in the Projects window and select File>Project Properties.

b

Right-click on the project name in the Projects window and select 'Properties'.

2

Under Categories, click on [[default]].

3

Under Hardware Tools, find 'ICD 4' and click on a serial number (SN) to select a debugger for use in the project.

​

  Return to Top

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.