ICD 4 Components

MPLAB® ICD 4 In-circuit Debugger components

The components of the MPLAB® ICD 4 In-Circuit Debugger system are:

  • A puck-shaped MPLAB ICD 4 unit housed in a durable, black case with a brushed aluminum top which is accented with an LED indicator bar, a Mini-B USB connector, an RJ-45 connector, and a power connector
  • A Mini-B USB cable to provide communication between the debugger and a computer and to provide power from the computer to the debugger
  • A 6-inch modular cable (6-pin RJ-11 type) to connect the MPLAB ICD 4 unit to a header module or target board
  • An ICD Test Interface Module (AC164113) to self-test the debugger

Basic Debugger System


Additional hardware and accessories may be ordered separately from Microchip Direct:

  • Power supply (Part Number AC002014) to provide up to 1 A of power to the target application
  • Transition sockets
  • ICD headers
  • MPLAB® processor extension kits
© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.