ICD 4 Debugger Options - Program Options
Choose to erase all memory before programming or to merge code.
PROGRAM OPTIONS OPTION CATEGORY
Erase All Before Program | Check to erase all memory before programming begins. Unless programming new or already erased devices, it is important to have this box checked. If not checked, the device will not be erased and the program code will be merged with the code already in the device. |
Enable Low-Voltage Programming | For Programmer Settings only, PIC®12F/16F1xxx devices: For the LVP configuration bit set to Low-voltage programming enabled, you may program in either high-voltage (default) or low-voltage (enabled here.) For the LVP configuration bit set to High-voltage on MCLR/VPP must be used for programming. You may only program using high-voltage. |
Programming Method | Select either Apply VDD before VPP (default) or Apply VPP before VDD. |
LED Brightness Setting | Select the level of brightness from 1 (darkest) to 10 (brightest). |
PGC Configuration | Select either none, pull up or pull down. The default is pull down. |
PGC resistor value (kΩ) | Type in a resistor value from 0-50. The default value is 4.7 kΩ. |
PGD Configuration | Select either none, pull up, or pull down. The default is pull down. |
PGD resistor value (kΩ) | Type in a resistor value from 0-50. The default value is 4.7 kΩ. |
Program Speed | Select either Low, Normal or High. The default is Normal. |