Log Out

After you finish choosing the settings in the Advanced Mode, click Log out located in the lower left corner to save your settings. Exit the Advanced Mode, and return to the main window. See figure below:

IPE_logout.png


While the MPLAB® IPE is logging out and returning to the main window, you'll see messages such as Encrypting and saving the settings…, Completed, and Logging off… in the bottom of the IPE window as below:

IPE_logout_savings.png

IPE_logout_completed.png

IPE_logout_logoff.png
© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.