Disable a Tuple Breakpoint

You can disable tuple breakpoints that you have set so that they will be remembered by MPLAB® X IDE but will no longer affect the program's execution. They can be re-enabled when you need them again.

1

Open the Breakpoints window.

Main Menu:
Window > Debugging > Breakpoints

Keyboard:

Alt+Shift+5

Menu-Debugging-Breakpoints.png
Click image to enlarge.

2

Disable the breakpoint.

Uncheck the box next to the tuple breakpoint you want to disable. The IDE will remember its settings without affecting program execution.

Tuple-Disable2.png
Click image to enlarge.

  Return to Top

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.