Customize Audio Notification

To configure audio settings, check “Audio Notification” in the Halt Notifier window and click Settings (see Figure 1). The Audio Settings window opens (see Figure 2).

Figure 1: Audio Notification Settings


In the Audio Settings window, the default audio alert is the beep sound. You can change the alert to an audio file, browse for the file, and specify the duration in seconds. Click OK when done. When a breakpoint is encountered in MPLAB® X IDE, an audio file is played.

Figure 2: Audio Settings Window

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.