Install and Launch the Halt Notifier Plugin

Open MPLAB® X IDE and install the Halt Notifier plugin. For installation instructions, see Install plug-ins supplied by Microchip.

Once the plugin is installed, from the MPLAB X IDE menu bar select Tools > Embedded > Halt Notifier to launch the plugin. The Halt Notifier window opens (see figure).

Figure: Halt Notifier Window

Notifications.gif

The default is set to “Disable”. You can enable the halt notifications and select any combination of notification methods (see Enable, Disable and Configure Notifications).

  Return to Top

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.