Tools Menu Differences - MPLAB® X IDE and MPLAB® IDE v8

The following table highlights the Tools menu changes from MPLAB® IDE v8 to MPLAB X IDE. Due to the changes in MPLAB X IDE, not all MPLAB IDE v8 menu items will map identically. Major differences are discussed under Comments.

Table: Tools Menu Differences

MPLAB® IDE v8 MPLAB® X IDE Comments
Data Monitor and Control Interface
(DMCI) and other plugins
Tools > Plugins
Tools > Embedded
To install
To use
MPLAB® Macros Edit > Start Macro Recording
Edit > Stop Macro Recording
After recording, you can
enter a macro name
and shortcut.
RTOS Viewer Tools > Plugins
Tools > Embedded
To install
To use
© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.