Makefiles Description

The main MPLAB® X IDE project Makefile lives at $PROJEC_DIR/Makefile. This is the Makefile the IDE calls. For each configuration in the project, there is also a Makefile-local-$ and a Makefile-$ where $conf is the name of the configuration. The main $PROJEC_DIR/Makefile file will call make again on these configuration-specific files. The Makefile-local-$ contains macro values that are tied to the host where the Makefile was generated. You have the option of not keeping this file if you want the Makefile-$ to work in another system. In that case, you can call make, specifying all the values that are normally found in the Makefile-local-$ to match the host where the make is being run. How to do this is explained later on.

If you recreate the files with prjMakefilesGenerator, the Makefile-local-$ will be correct at that point and will work on the machine where it was run.

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.