AC162061

Header Identification

The AC number is used for ordering the Processor Extension Pak, which contains the debug header. However, this number is not on the header, as the board may be used for multiple headers by inserting different -ICE/-ICD devices. To identify these headers, use the following information.

AC Number -ICE/-ICD Device Board Assembly Number
AC162061 PIC16F690-ICD 02-01835

Header Setup and Operation

For the PIC16F690 20-pin header, you will need to set the S1 switches shown in the figure to enable peripherals and choose devices as per the table.

Figure: S1 Switch Hardware
HeaderX_2_07_1.jpg

Table: S1 Switch Device Selection

Device Switches
1
ECCP
2
SSP
3
USART
4
4k PFM
5
ADC
PIC16F631 0 0 0 0(1) 0
PIC16F677 0 1 0 0(2) 1
PIC16F685 1 0 0 1 1
PIC16F687 0 1 1 0(2) 1
PIC16F689 0 1 1 1 1
PIC16F690 1 1 1 1 1
Legend: 1=Enabled, 0=Disabled, (1)=1k PFM, (2)=2k PFM

Header Limitations

Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine if a device on a header has limitations, see your hardware tool documentation.

Header Dimensions

The figure below lists the dimensions for the debug header. Dimensions are design values in inches.

If the length and/or width of the debug header is too large a footprint for the target board, consider using stand-offs, transition sockets or other extenders in the header connection socket to raise the header above the target.

Figure: Dimensions – AC162061
Dimensions_AC162061.jpg
© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.