PICkit™ 3 (PG164130)
PICkit3.png

PICkit™ 3 In-Circuit Debugger is Microchip's lowest cost hardware debugger/programmer. Like the MPLAB® REAL ICE™ In-Circuit Emulator and MPLAB ICD 3, it can program and debug Microchip PIC® microcontrollers and dsPIC® digital signal controllers. Also it works seamlessly with the MPLAB X IDE.

The PICkit 3 connects to a PC using a full-speed USB 2.0 interface and connects to the target using the same interface found on all Microchip Debugger/Programmers, an In Circuit Serial Programming (ICSP) interface.

The PICkit 3 In-Circuit-Debugger/Programmer is NOT a production programmer. It should be used for development purposes only.

 
Microchip Direct
Buy here >

How It's Used

PC-PICkit3-Explorer16.png

Similar Tools

Accessories

  • TPROG001
© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.