Isolator Unit for the MPLAB® REAL ICE™ In-Circuit Emulator

The isolator unit (AC244005) for the MPLAB® REAL ICE™ In-Circuit Emulator, also known as an optoisolator, is a useful accessory to the MPLAB REAL ICE in-circuit emulator system. The isolator enables connectivity for Alternate Current (AC) line and high voltage applications not referenced to ground. Typically, these are consumer applications such as light dimmers, vacuum cleaners, washing machines, and other types of motor-based systems where the MCU uses a non-isolated power supply.

Danger_Electrical.jpg exclamation_sm.gifDANGER
Potential Electrical Hazard.
Do not remove the board enclosure. Depending on your application, you could be exposing yourself to dangerous voltage levels.


Isolator topics are:

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.