JTAG Adapter (for PIC32 MCUs)

The JTAG Adapter (AC244007) for the MPLAB® REAL ICE™ In-Circuit Emulator may be used to provide JTAG communication between the MPLAB REAL ICE In-Circuit Emulator and a target PIC32 device.

The kit contains a JTAG adapter board, a ribbon cable, and an installation sheet (DS50002094).

A possible JTAG connector for a target board could be the Samtec™ CONN, HDR, 2x7 Shrouded For Cable Strip, 130-inch RA Tail Length (TST-107-04-G-D-RA).

Topics discussed are:

Figure: JTAG Adapter Board Connections
© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.