ATWINC1500 Development Tools

ATWINC1500-XPRO

ATWINC1500-XPRO.jpg

The ATWINC1500-XPRO is an extension board to the Xplained Pro evaluation platform. The ATWINC1500-XPRO extension board allows you to evaluate the ATWINC1500 low-cost, low power 802.11 b/g/n Wi-Fi® network controller module.

Features

  • ATWINC1500 module mounted on ATWINC1500 Xplained Pro Extension board
  • Connects to standard Xplained Pro headers on Xplained Pro MCU board
  • ATECC508 CryptoAuthentication device connected to host MCU
  • Supported with application examples through Atmel gallery

WINC1500 PICtail™/PICtail Plus Daughter Board

WINC1500PICtail.png

The WINC1500 PICtail™ or PICtail Plus Daughter Board is a demonstration and development board for the WINC1510-MR210PB certified Wi-Fi module. This daughter board has PICtail and PICtail Plus connectors to interface with a PIC microcontroller on development boards that support the PICtail or PICtail Plus interfaces.

Features

  • Option to switch power source between USB and PICtail/PICtail Plus interface baseboard
  • The UART debug interface of WINC1500 daughter board can be plugged directly into PC
  • User LEDs for indications
  • Power measurement header
  • I2C debug header for RF validation
  • GPIO debug header

SAM W25 Xplained Pro Evaluation Kit

ATSAMW25-XPRO.jpg

The SAMW25 Xplained Pro evaluation kit is a wireless hardware platform to evaluate the ATSAMW25H18-MR510PB Wi-Fi module which is based on the industry-leading low-power 2.4 GHz IEEE 802.11 b/g/n Wi-Fi ATWINC1500 SoC (System on Chip) combined with the ARM® Cortex™ - M0+ ATSAMD21G18A microcontroller.

Features

  • Embedded Debugger (EDBG)
  • USB interface
  • Programming and debugging on board SAMW25 through Serial Wire Debug (SWD)
  • Virtual COM-port interface to target via UART
  • Microchip Data Gateway Interface (DGI) to target via SPI, I2C, GPIO
  • One yellow status LED, one green LED - Board Power status
  • Three possible power sources
  • External power
  • Target USB
  • Embedded debugger USB
  • Two mechanical buttons (user and reset button)
  • One yellow user LED
  • One Wi-Fi Status LED
  • One extension header
  • Embedded debugger USB
  • Target USB
  • 8Mbit Serial Flash
  • 32 KHz crystal
  • 12 MHz crystal (EDBG)
  • Supported with application examples in Advanced Software Framework (ASF)

ATWINC1500-XSTK

ATWINC1500-XSTK.jpg

The ATWINC1500-XSTK Xplained Pro starter kit includes the ATWINC1500 module mounted on ATWINC1500 Xplained Pro Extension, the ATSAMD21-XPRO host MCU board for driving the ATWINC1500 Xplained Pro Extension, and the I/O1 Xplained Pro for sensor and SD-card input to host MCU.

Features

  • Embedded Debugger (EDBG) for programming SAMD21 host MCU
  • Virtual COM-port interface to host MCU via UART
  • Wired firmware updates for ATWINC1500 module via virtual COM-port interface
  • Data Gateway Interface (DGI) to host MCU via SPI and TWI
  • ATECC108 CryptoAuthentication device connected to host MCU
  • Two extension headers
  • Three possible power sources
  • External power
  • Target USB
  • 32 KHz crystal
  • 16 MHz crystal
  • Supported with application examples through Atmel gallery

  Return to Top

© 2024 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.